Free Video Call Recorder for Skype

It is the first free Skype video call recorder

in the world for recording Skype calls without any limitations.
With its help one may record Skype calls

in the following modes:
- picture-in-picture (the program records audio and video of all sides of the conversation);
- only video of other sides;
- only audio (all sides).
Exclusive advantages of Skype video recorder:

- sincere to use and simple interface;
- high quality video/audio recording;
- low processor (CPU) requirements;
- 'pause recording' feature;
- no extra libraries are needed to use the program;
- live broadcast recording (without re-encoding).
You just need to specify the mode you like, choose the output folder and press “Start”. If you don't want to record some moments during the conversation, just click on “Pause”. In order to finish the record select “Stop”.
The program creates mp4 video from video calls and mp3 audio from audio calls which are supported by most modern players.
contains no spyware or adware whatsoever. It's 100% free and absolutely safe to install and run. It's free both for personal and commercial use.

DVDVideoSoft's products are freeware. In order to maintain product development and provide you with high-quality software, DVDVideoSoft may bundle links to other websites and third-party apps installations including toolbars in its products. Every time DVDVideoSoft products are installed, you have an obvious option to accept or opt-out of such installations.
Windows 8, 7, Vista, XP SP3


Free Video Call Recorder for Skype

Read More

System Requirements For | Windows 8.0 |

If you want to run Windows 8 on your PC, here's what it takes:

• Processor: 1 gigahertz (GHz) or faster with support for PAE, NX, and SSE2 (more info)
• RAM: 1 gigabyte (GB) (32-bit) or 2 GB (64-bit)
• Hard disk space: 16 GB (32-bit) or 20 GB (64-bit)
• Graphics card: Microsoft DirectX 9 graphics device with WDDM driver

Additional requirements to use certain features:

• To use touch, you need a tablet or a monitor that supports multitouch (more info)
• To access the Windows Store and to download and run apps, you need an active Internet connection and a screen resolution of at least 1024 x 768
• To snap apps, you need a screen resolution of at least 1366 x 768
• Internet access (ISP fees might apply)
• Secure boot requires firmware that supports UEFI v2.3.1 Errata B and has the Microsoft Windows Certification Authority in the UEFI signature database
• Some games and programs might require a graphics card compatible with DirectX 10 or higher for optimal performance
• Microsoft account required for some features
• Watching DVDs requires separate playback software (more info)
• Windows Media Center license sold separately (more info)
• BitLocker To Go requires a USB flash drive (Windows 8 Pro only)
• BitLocker requires either Trusted Platform Module (TPM) 1.2 or a USB flash drive (Windows 8 Pro only)
• Client Hyper-V requires a 64-bit system with second level address translation (SLAT) capabilities and additional 2 GB of RAM (Windows 8 Pro only)
• A TV tuner is required to play and record live TV in Windows Media Center ( Windows 8 Pro Pack and Windows 8 Media Center Pack only)
• Free Internet TV content varies by geography, some content might require additional fees (Windows 8 Pro Pack and Windows 8 Media Center Pack only)

You can check to see if your PC meets the requirements for Windows 8 by running the Upgrade Assistant.

Read More

System Requirements For | Windows 8.1 |

If you want to run Windows 8.1 on your PC, here's what it takes:

• Processor: 1 gigahertz (GHz) or faster with support for PAE, NX, and SSE2 (more info)
• RAM: 1 gigabyte (GB) (32-bit) or 2 GB (64-bit)
• Hard disk space: 16 GB (32-bit) or 20 GB (64-bit)
• Graphics card: Microsoft DirectX 9 graphics device with WDDM driver

If you're running Windows 8 you can get a free update to Windows 8.1. Just tap or click the Windows Store tile on your Start screen. Once you've moved up to Windows 8.1 you should get the update automatically. If you don't, follow these steps to get it manually using Windows Update.

Additional requirements to use certain features:

• To use touch, you need a tablet or a monitor that supports multitouch (more info)
• To access the Windows Store and to download, run, and snap apps, you need an active Internet connection and a screen resolution of at least 1024 x 768
• Microsoft account required for some features
• Internet access (ISP fees might apply)
• Secure boot requires firmware that supports UEFI v2.3.1 Errata B and has the Microsoft Windows Certification Authority in the UEFI signature database
• Some games and programs might require a graphics card compatible with DirectX 10 or higher for optimal performance
• Watching DVDs requires separate playback software (more info)
• Windows Media Center license sold separately (more info)
• BitLocker To Go requires a USB flash drive (Windows 8.1 Pro only)
• BitLocker requires either Trusted Platform Module (TPM) 1.2 or a USB flash drive (Windows 8.1 Pro only)
• Client Hyper-V requires a 64-bit system with second level address translation (SLAT) capabilities and additional 2 GB of RAM (Windows 8.1 Pro only)
• A TV tuner is required to play and record live TV in Windows Media Center (Windows 8.1 Pro Pack and Windows 8.1 Media Center Pack only)
• Miracast requires a display adapter which supports Windows Display Driver Model (WDDM) 1.3, and a Wi-Fi adapter that supports Wi-Fi Direct
• Wi-Fi Direct Printing requires a Wi-Fi adapter that supports Wi-Fi Direct and a device that supports Wi-Fi Direct Printing
• Free internet TV content varies by geography, some content might require additional fees (Windows 8.1 Pro Pack and Windows 8.1 Media Center Pack only)
• To install a 64-bit OS on a 64-bit PC, your processor needs to support CMPXCHG16b, PrefetchW, and LAHF/SAHF
• InstantGo works only with computers designed for Connected Standby

If your PC is currently running Windows 7 or Windows 8 you can check to see if it meets the requirements by running the Upgrade Assistant. We also recommend that you visit your PC manufacturer's website for info about updated drivers and hardware compatibility.

Read More

How to install Windows 8 with DVD | step by step | Tutorial

This step-by-step guide demonstrates how to install Microsoft Windows 8 Professional. You can follow this guide if you have Windows 8 basic edition or any other version as the steps are very similar.

Windows 8 Professional DVD is bootable. In order to boot from the DVD you need to set the boot sequence. Look for the boot sequence under your BIOS setup and make sure that the first boot device is set to CD-ROM/DVD-ROM.

Step 1 - Place Windows 8 DVD in your dvd-rom drive and start your PC. Windows 8 will start to boot up and you will get the following screen with a rotating progress bar.

Step 2 - The next screen allows you to setup your language, time and currency format, keyboard or input method. Choose your required settings and click next to continue.

Step 3 - The next screen allows you to install or repair Windows 8. Since we are doing a clean install we will click on "install now".

Step 4 - The setup process starts as shown.

Step 5 - At this stage you need to type your product key that came with your copy of Windows 8. Click next once you have entered the product key correctly.

Step 6 - Read the license terms and tick I accept license terms. Then click next to continue.

Step 7 - Choose the type of installation you want. Since you are doing a clean install you need to click on custom.

Step 8 - Choose where you would like to install Windows 8. If you have one hard drive you will get an option similar to the image below. You can click next to continue then go to step 12.
If you have more than one drive or partition then you need to select the appropriate drive and click next. At this stage you can go to step 12.
If you want to partition a large drive then do not click next. Go to step 9.

Step 9 - If you want to partition an existing drive then click new. Choose the size of the partition and click apply.

Step 10 - Click OK to create the partition. Windows will create additional system partition which you don't have to worry about.

| 1 | 2 | 3 | 4 | >> Next

Read More

How to do First | Boot and BIOS Setup | Tutorial

Turn the PC on by pressing the power switch. If everything goes well you will hear a short beep followed by a boot screen. At this stage we need to enter the BIOS to check that all the hardware is detected correctly.

Step 1- We will also make few changes so that we are ready to install an operating system such as Windows 7.To enter bios setup press the delete key as the computer boots up. Please note it could be a different key on your system such as F1, so check your boot screen or manual for more details. This is the main bios setup menu.

Step 2- Lets select the Intelligent Tweeker menu by pressing enter. As you can see the CPU speed, memory speed and size are detected correctly. Press escape to go back to the previous menu.

Step 3- Lets enter Standard CMOS features. As you can see the hard drive and dvd writer are alsodetected correctly.

Step 4- This time we will enter the Advanced BIOS features.

Step 5- We will make our first boot device CDROM, and second boot device as hard disk.

Step 6- By doing this we can make sure that the computer boot from Windows 7 DVD that is placed in the DVD drive. If the hard drive is set to first boot device it will not boot as it has no operating system installed.

Step 7- Finally we can save & exit setup. At this stage you can place a operating system disc in the DVD drive and you are ready to install your chosen operating system.

Read More

How to install Windows 7 with DVD | step by step | Tutorial

Here is step by step tutorial to install window 7 with DVD in PC or Laptop:-

Plz do the following steps to install window 7

Step 1 - Place Windows 7 DVD in your dvd-rom drive and start your PC. Windows 7 will start to boot up and you will get the following progress bar.

Step 2 - The next screen allows you to setup your language, time and currency format, keyboard or input method. Choose your required settings and click next to continue.

Step 3 - The next screen allows you to install or repair Windows 7. Since we are doing a clean install we will click on "install now".

Step 4 - Read the license terms and tick I accept license terms. Then click next to continue.

Step 5 - You will now be presented with two options. Upgrade or Custom (Advanced). Since we are doing a clean install we will select Custom (Advanced).

Step 6 - Choose where you would like to install Windows 7. If you have one hard drive you will get a similar option to the image below. You can click next to continue. If you have more that one drive or partition then you need to select the appropriate drive and click next. If you need to format or partition a drive then click Drive options (advance) before clicking next.

| 1 | 2 | 3 | 4 | >> Next

Read More

How to Create a bootable USB flash drive to install Windows 8 Developer Preview

Instructions (using the command line)

At a high level, the steps are:

1. Mount the Windows 8 Developer Preview ISO image on your computer

1. Format a USB flash drive

1. Copy the Windows 8 files onto the USB flash drive

1. Make the USB flash drive bootable

1. Install Windows 8 from the bootable flash drive

Step 1: Mount the Windows 8 Developer Preview ISO image
on your computer:-

The first step is to mount the ISO image on your computer. Since Windows 7 doesn’t have the capability to mount an ISO image, you’ll have to use a 3rd party tool.

1. Download the Windows Developer Preview ISO image (choose one of the three available)

1. Using your favorite ISO image software, mount the ISO image on your computer

To check that the ISO image mounted successfully, you should be able to browse the Windows 8 files, as shown below.

Step 2: Format a USB flash drive:-

In case you’re wondering how big of a USB flash drive you need, an 8GB drive is perfect since it can accommodate any of the three available ISO images. Here are the steps to format a USB flash drive.

1. Insert a USB flash drive into your computer

1. Start a Command Prompt as an Administrator and type diskpart. This starts the Disk Partition tool which you need to use to format the flash drive. Once you see the DISKPART command prompt, type in the following commands

1. DISKPART> list disk                                 /* shows list of active disks */

1. DISKPART> select disk #                         /* # is the number for your USB flash drive */

1. DISKPART> clean                                     /* deletes any existing partitions on the USB flash drive */

1. DISKPART> create partition primary     /* create a primary partition on the USB flash drive */

1. DISKPART> select partition 1                 /* select the newly created partition */

1. DISKPART> active                                    /* make the new partition active */

1. DISKPART> format FS=NTFS                 /* format the USB drive with NTFS file system */

1. DISKPART> assign                                   /* assign a volume and drive letter to the USB drive */

1. DISKPART> exit                                        /* exit Disk Partition */

At this point, your USB flash drive should be showing up in Windows Explorer and have a drive letter assigned to it, e.g. F:\.

Step 3: Make the USB flash drive bootable:-

We just need to make the USB flash drive bootable before copying the files. To do this, you can use the Boot Sector Registration Tool (bootsect.exe) which is located in the boot folder of the Windows 8 ISO image.

1. Start a Command Prompt as an Administrator and CHDIR into the boot folder of the Windows 8 ISO image, e.g. I:\boot where I:\ is the drive where the ISO image is mounted

1. Type bootsect /nt60 E:                              /* where E: is the drive assigned to the USB flash drive */

You should see the following confirmation after bootsec.exe completes:

Step 4: Copy the Windows 8 files onto the USB flash drive:-

From a command line, use XCOPY to copy the Windows 8 files to the USB flash drive . In the example below, I:\ is the drive where the ISO image is mounted. F:\ is the USB flash drive.

XCOPY I:\*.* F:\ /E /F /H

Step 5: Install Windows 8 from the bootable flash drive:-

Finally, follow these instructions to install Windows 8 on your computer.

1. Remove your USB flash drive from your "source" computer and insert it into the "target" computer where you want to install Windows 8
2. On the computer where you are installing Windows 8, press the power button to turn on the computer
3. During boot up, select the USB flash drive to boot from (if you don't see the USB flash drive as an option, you may have to adjust your BIOS settings)
4. Follow the instructions to install Windows 8 Developer Preview

Here is a screen shot from the boot manager on my computer showing the USB flash drive as an option.

I installed Windows 8 Developer Preview on a vanilla Dell Inspiron 15R laptop which unfortunately doesn't have touch (or any other sensors for that matter).

The personalization steps in Windows 8 Developer Preview are really quick.

And here is the final screenshot of my shiny new Windows 8 installation!

If You like our Tutorial then must Share and comment... Register Softwares

Read More