Step 27 - As Windows 8 setup progresses you are given a presentation of the new interface. Its shows you how swiping the edge of the screen brings up the Charm bar. Using the Charm bar you can do a search or change your settings. It also demonstrates how you can hover your mouse on the bottom or top left corner to access the switch list. This list shows all open applications and allows you to switch between them.
Step 28 - Soon as the demonstration finishes windows moves into the final stages of the setup.
Step 29 - Finally the setup process is finished and you are presented with a completely new and unfamiliar Metro user interface. You have your most common application right in front of you. Clicking on any tiles will launch that application. At this point you can start using your computer. However, it may not be fully configured. You need to make sure that all the hardware is detected correctly and the necessary device drivers are installed. This can be done from the device manager.
Step 30 - To go to device manager click search on charm bar on the right. Then type devmgmt.msc. Click on the devmgmt icon on the left.
Step 31 - You will see all your hardware listed as shown on the image below. You need to check if you have any yellow exclamation marks next to the name of the devices, similar to "Base System Device" on the image below. This indicates that the driver has not been installed for this device.
At this stage you can install the driver for this device. To do so, Right Mouse click on Base System Device -> Update Driver Software...
Step 32 - You can choose to "Search automatically for updated driver software" or "Browsemy computer for driver software". If you have the driver CD or if the driver is on a USB drive then choose "browse my computer for driver software". Window 8 will search and install the driver from the CD or you can locate the driver manually.
Once you have removed all the yellow exclamation marks from the device manager yourWindows 8 configuration would be fully complete.
At this stage you can install the driver for this device. To do so, Right Mouse click on Base System Device -> Update Driver Software...
Once you have removed all the yellow exclamation marks from the device manager yourWindows 8 configuration would be fully complete.
0 comments:
Post a Comment